Standard OEM air recirculation dump valve in plastic for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Machined, aluminium, vent to atmosphere, piston dump valve.

Suitable for boost up to 1.3 Bar & a stiffer spring is included for 1.3 - 3 Bar competition cars.

Exhaust down pipe with flexible section for Lancia Delta integrale 8v, 16v & Evolution 1. As original, hot-dip galvanized steel with braided stainless steel flexible section. Made in Italy by an original equipment supplier.

The correct bore rear exhaust silencer for all Delta Evo models. OEM high quality galvanised steel with stainless steel tail pipe. Made by an O.E. supplier in Italy.

Exhaust sealing ring front to centre section and centre to rear silencer. Fits the standard exhaust on all Delta integrale 8v, 16v, Evo 1 and Evolution 2 models.

Note - front ring on Cat cars is 82407143,

Rubber exhaust mount for all Lancia Delta integrale 8v & 16v and Evo models.

Exhaust sealing ring  from catalyst to centre pipe on Lancia Delta integrale 8v Kat & Evo 2 models.

Genuine Weber 2.5 bar fuel pressure regulator for all Lancia Delta integrale 16v and Evo 16v without catalyst. Housed in silver anodized aluminium. We also stock 3 bar and 0-5 bar regulators.

Genuine Weber 3 bar fuel pressure regulator for all Lancia Delta integrale 8v models, Evo 8v Cat and Evo 2 16v Cat.

Exhaust front pipe to catalyst gasket for all 8v and 16v models including Evo 2.

Exhaust manifold gasket for Lancia Delta integrale 16v, Evolution 1 & Evo 2.

Inlet manifold gasket for integrale 16v, Evo 1 & 2

Exhaust front pipe to turbo elbow gasket for all Lancia Delta integrale and Evolution 8v and 16v models except the Evo 2 16v Cat.

Crank case breather hose to throttle body for all 16v models. Click here to find out more.

Silicone lower induction hose - turbo to intercooler for Lancia Delta integrale 16v, Evo 1 & Evolution 2.

You may also want 82451019 which is the turbo to radiator hose in black silicone.

Vacuum hose for all small bore pipes sold by the metre, specify length required.

Breather hose set for Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2.

Samco silicone top and bottom intercooler / induction hoses kit for 16v, Evo 1 & Evo 2.

Matte black silicone.

You may also like the hose clamp kit part number HCS17

Original injector for Lancia Delta integrale 16v, Evolution 1 & Evo 2. Limited stock available, please phone for a price.

Exhaust manifold lock nut for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Sold individually.

APS 02/03 black map sensor for Lancia Delta integrale 8v, 16v, Evolution 1 & Evo 2. Reproduction map sensor from Italy, made to original spec.

Copper turbo-flange locknut for Lancia Delta integrale 8v, 16v, Evo 1 & Evo 2. Sold individually.

Relay for fuel pump and engine ECU for integrale 8v, 16v and Evo 1.

Also heater fan, horn, cooling fan, rear screen, rear wiper, A/C.

Square plastic body plug for self tapping fixing screws i.e. wheel arch liner fixing screws.

Original Magnet Marelli "Blue" water temperature sensor for Weber Marelli IAW engine managment.

Fits Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Exhaust manifold stud for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. 5 per car. Sold individually.

Turbo to exhaust stud for cast manifolds on Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. Sold individually, price is per stud.

Genuine Pierburg wastegate control valve for all Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

You may also like the replacement hose and clamp kit:

Part No.:7632715KIT