Wheel bearing kit for Lancia Delta integrale 8v / 16v (front) or Evolution front & rear. Kit for one wheel.

Cap head (allen) bolt for front and rear inner CV joints, all models. Sold individually, 6 per joint.

Clutch to flywheel bolts for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. These include split washers. Sold as a set of 6.

Metalastic support for rear propshaft for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Lower gear lever bush for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Sold individually, 2 per car.

The lower half of the speedo cable (gearbox end) for Lancia Delta HF 4WD, integrale 8v & 16v.

The upper half of the speedo cable for Lancia Delta HF 4WD, integrale 8v & 16v.

You may also need the lower half of the speedo cable (Part No.:82441699)

Original Valeo 3 piece clutch for integrale 8v Kat, 16v, Evo 1 & Evo 2.

Lancia Delta integrale clutch master cylinder. For integrale 16v, Evo 1 and Evo 2. Does not fit integrale 8v cable clutch.

Clutch release bearing for 8v push type clutches.

Inner constant velocity joint for Lancia Delta integrale 8v, 16v, Evo 1, Evolution 2 models. Genuine SKF.

You may also need 4342726 bolt and 15503621 locknut.

Front outer constant velocity joint for Lancia Delta integrale 8v and 16v without ABS.

Outer constant velocity joint for Lancia Delta integrale 8v and 16v rear without ABS. Also fits HF Turbo (front!)

Rear diff cradle for all models. Protects the rear diff and stiffens the rear end when used in conjunction with the rear lower strut brace - OMPMA1663.

All models - gearbox to transfer box seal.

All models - LH front driveshaft seal housing.

Clutch hose for vehicles without a damper - Lancia Delta integrale 8v & 16v.

Hub drive flange front axle for all 4 stud Lancia Delta integrale 8v & 16v.

The mount for the rear differential to the carrier frame on Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

The lower front gearbox mounting to the crossmember bracket for Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models. Also available as a Powerflex bush: Mount Gearbox Front - Poly Part No.:PFF30-323

Upper gearchange rod rear support bush, near base of gear lever. For all models.

Also available in poly as PFF30-330.

Hub nut - front & rear to fit Lancia Delta integrale 8v, 16v and Lancia Delta Evolution & Evo 2.

Transfer box to propshaft seal for Lancia delta integrale 8v, 16v, Evo 1 & Evolution 2.

Gearbox input seal for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Gearbox pinion shaft cover and seal assembly for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Front differential to left hand driveshaft rotary seal for Lancia Delta integrale 8v Kat, 16v, Evo 1 & Evolution 2.

Right hand front driveshaft seal for differential/viscous coupling housing for Lancia Delta integrale 8v non-kat (1987-1988).

Spring clip for drive shaft location to CV joints and differential splines for all models.

Clutch cable for Lancia Delta integrale 8v. OEM manufacturer.