Rubber O ring for LH rear driveshaft seal housing to diff. 

Primary (top) shaft rear bearing (near fifth gear) for 8v integrale and HF 4WD. No. 12 in diagram. Very limited availability please enquire.

Reconditioned Ferguson viscous coupling Group N specification for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. Exchange unit, sold with a core charge.

Wheel hub bearing kit for Lancia Delta integrale 8v and 16v rear only. OEM manufacturer, made in Italy.

The mounting bush for the top of the gearbox to the inner wing bracket for Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

Gaiter (boot) kit for the front and rear driveshaft outer CV joint on all Lancia Delta integrale 8v, 16v and Evolution 1 and Evo 2 models. Includes clips.

Gaiter (boot) for the front and rear drive shaft inner CV joint on all Lancia Delta integrale 8v, 16v, Evo, Evo 2 and Fulvia S1, 2 and 3. Includes metal flange.

OEM Tutela ZC90 oil for the rear differential on Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. The correct spec (API GL-3).

2 litres needed for rear diff.

Very limited availability.

OEM Tutela ZC75 Synth gearbox oil for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. Correct spec (API GL-5).

3.8 litres are needed (4 bottles).

Rubber gasket for plastic gearbox cover on all models of Delta integrale and Evoluzione.

Clutch master cylinder seals kit for all models except 1988 8v with cable.

Circlip for clutch slave cylinder. For all models with a hydraulic clutch.

Secondary (lower) shaft rear bearing (near fifth gear) for 8v integrale and HF 4WD. No.14 on diagram.

Very limited availability, please contact us.

Lancia delta integrale 8v gearbox bearing.

Rear outer CV joint for 8v & 16v integrale with ABS.

Very limited availability, please contact us.

Front drive shaft carrier bearing - left hand. Made by SKF. For all models

O ring seal between transfer box and viscous coupling housing. Evolutions only. All other models do not have this seal.

Viscous Coupling (Ferguson) Nose Carrier Bearing. Made by SKF. All models.

4 bolt pattern rear hub drive flange for 8v and 16v integrale.

Very limited availability, please contact us.

Lancia Delta integrale rear diff carrier frame 8v, 16v, Evo 1 and Evolution 2.

No longer available.

Evolution black rubber gearchange gaiter for top of gearbox. Will fit all models.

Rear Diff carrier upper mounting to body, all models. 2 per car, sold individually.

You may also need the lower mounting.

Rear diff carrier lower mounting to body, all models. 2 per car, sold individually.

You may also need the upper mounting - 82424667

Powerflex upper gearchange rod rear support poly bush, near the base of the gear lever. For all models. 1 per car.

Powerflex lower gear lever poly bush for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. 1 bush per car.

Engine steady bar bracket bush in poly for all models. This bush is for the engine block end of the steady bar. Made by Powerflex. 1 per car.

Engine steady bar bush in poly for all models. This bush is for the body end of the steady bar. Made by Powerflex. 1 per car.

The mounting bush for the top of the gearbox to the inner wing bracket for Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models. Made by Powerflex. 1 per car, fits all models.