Standard size factory piston for Lancia Delta integrale 8v. You may also be interested in a set of forged 8v pistons part No.:9010DA

Cam shaft pulley bolt for all Lancia Delta integrale and Evo models. Sold individually.

Lancia Delta integrale 8v exhaust camshaft manufactured & case hardened by the original factory supplier.

Inlet camshaft for 8v integrale, manufactured & case hardened by the original factory supplier.

Upper cam cover gasket for Lancia Delta integrale 8v and Evo 8v Kat. Supplied by the OE manufacturer in Italy.

Original equipment quality Dayco 5 rib auxiliary drive belt for alternator, waterpump and PAS pump on Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

Front crankshaft seal (in oil pump housing). Also correct for the LH (rear) balance shaft front seal.

Lancia Delta integrale 8v, 16v, Evo 1 and Evolution 2. All models. Made by the original equipment manufacturer.

Right-hand rotary seal - balance shaft. For integrale 8v, 16v, Evo1 & Evoluzione 2. OEM manufacturer.

Camshaft oil seal for Lancia Delta integrale 8 valve / Evo 8v.

Original equipment Dayco balance shaft timing belt for all Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

Dayco was the original factory supplier.

Original equipment Dayco cam-shaft timing belt for all 8v Lancia Delta integrale, Evolution 1 8v. Dayco was the original factory supplier.

The mounting bush for the top of the gearbox to the inner wing bracket for Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

Not currently available in original rubber.

Bucket shim for Lancia Delta integrale 8v, 16v, Evo 1 & Evo 2.

Please state sizes required - shims are supplied in increments of 0.05, from 3.25mm to 4.90mm. For example: 3.85, 3.90, 3.95, 4.00, 4.05.

Standard size 84mm piston rings 1.5/2/4 mm set for 4 pistons. For all 8v and 16v integrale and Evolution except Evo 2 16v KAT.

Pair of crankshaft thrust bearings/washers in Standard size for all Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

Main bearing set for Lancia Delta integrale 8v, 16v, Evo 1 & Evo 2.

Crank main bearings in 1st size oversize (+10 or 0.254mm) for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Crank main bearings in 2nd size oversize (+20, 0.508mm) for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Set of connecting rod big end bearings in standard size. For Lancia Delta integrale 8v and Evo1 8v models.

Set of connecting rod big end bearings in first oversize + 0.254mm (0.010"). For Lancia Delta 8v integrale and Evo 8v models.

Set of connecting rod big end bearings in second oversize + 0.508mm (0.020"). For all Lancia Delta integrale 8v and Evo 8v models. Limited availability, please enquire on 01299266355.

Cylinder head stretch bolt for 8v cars. 10 per car, sold individually.

Top engine gasket set for Lancia Delta integrale 8v Kat and Evo 8v Kat from engine number 1039767 onwards.

Includes head gasket & valve stem seals.

Complete engine gasket set including head gasket for Lancia Delta integrale 8v Kat. Includes valve stem seals. From engine number 1039767.

Genuine quality OEM standard head gasket for all Lancia Delta integrale 8v, 16, Evo 1 & Evoluzione 2 from 1990 onwards.

Inlet valve for Lancia Delta integrale 8v.

Exhaust valve for Lancia Delta integrale 8v and 8v Evo. Sold individually. OEM quality.

Engine steady bush for Lancia Delta integrale 8v, 16v, Evolution 1 & Evo 2.